SE 1102 C11
ICA UPS SE 1102 C11 Capacity 10.000 VA, inverter only works when the AC input voltage is low or loss. When the AC input voltage is in normal condition, ICA UPS will stabilize and filter the AC input voltage and supply a clean and stable AC voltage to the ICA UPS output and charge the battery. When the AC input voltage is low or loss, inverter will replace it and supply a stable AC voltage within a very short transfer time.
| Model | : | UPS SE1102C11 |
| Capacity | : | 10000 VA / 9000 W |
| AC Input Voltage | : | 120 – 276 V (1 Phase) |
| AC Input Frequency | : | 45 – 65 Hz |
| AC Input Protection | : | 63 A |
| DC Input Voltage | : | ±120 V |
| DC Input Internal Battery | : | 20 x 12 V, 7 Ah |
| DC Input Protection | : | MCB |
| Charger Topology | : | SWITCHING REGULATION |
| Charger Floating Voltage | : | ±136 V |
| Inverter Output Waveform | : | SINEWAVE |
| Inverter Output Distorsion | : | <2% THD |
| Inverter Output Topology | : | Online Double Conversion |
| Inverter Output Voltage | : | 220 ± 1% V |
| Inverter Output Frequency | : | 50 ± 1 % Hz |
| Inverter Output Efficiency | : | ≥ 90 % |
| Transfer Time When AC Input Loss | : | 0 ms |
| Static Transfer Switch | : | 0 ms |
| Back Up Time | : | 10 min |
| Overload | : | Load ≤110%: last 60min, ≤125%: last 10min, ≤150%: last 1min, ≥150% change to bypass |
| Communication | : | USB, RS232, RS485, Parallel port, REPO port, Coupler dry contact, Intelligent slot, SNMP card (optional), Relay card (optional) |
| Operation Temperature | : | 0 – 40°C |
| Standards | : | IEC/EN62040-1, IEC/EN60950-1, IEC62040-3, IEC/EN62040-2, IEC61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5, IEC61000-4-6, IEC61000-4-8 |
| Dimension(DxWxH) | : | 530 x 255 x 640 mm |
| Weight Netto | : | 76.0 Kg |
| Weight Gross | : | 86.0 Kg |