SE 1102 C33
ICA UPS SE 1102 C33 Capacity 10.000 VA, inverter only works when the AC input voltage is low or loss. When the AC input voltage is in normal condition, ICA UPS will stabilize and filter the AC input voltage and supply a clean and stable AC voltage to the ICA UPS output and charge the battery. When the AC input voltage is low or loss, inverter will replace it and supply a stable AC voltage within a very short transfer time.
Bypass Voltage Range:380Vac Max. voltage: 25% (optional +10%, +15%, +20%)
400Vac Max. voltage: +20% (optional +10%, +15%)
415Vac Max. voltage: +15% (optional +10%)
Min. voltage: -45% (optional -20%, -30%)ECO Range:Same as bypassBattery Voltage:±120VdcBackup Configuration:ExternalOutput Voltage:380 / 400 / 415 Vac (3Ph+N+PE)Voltage Regulation:±1%Frequency Bat. Mode:50/60 (±0.1)HzHarmonic Distortion (THD):≤2% with linear load
≤5% with non-linear loadSYSTEM FEATURES
Communication:USB, Rs232, Rs485, Parallel port, REPO port, Coupler dry contact, Intelligent slot, SNMP card (optional), Relay card (optional)Operating Temperature:0 ~ 40ºCHumidity Range:0 ~ 95% (Non-condesing)Noise Level:<55dBGross Weight:73Safety:IEC/EN62040-1, IEC/EN60950-1
| Model | : | UPS SE1102C33 |
| Capacity INPUT | : | 10000 VA / 9000 W |
| Nominal Voltage | : | 380 / 400 / 415 Vac (3Ph+N+PE) |
| Operating Voltage Range | : | 208 ~ 478 Vac |
| Operating Frequency Range | : | 45~55Hz / 54~66Hz (auto sensing) |
| Power Factor | : | ≥0.99 |
| Bypass Frequemcy Range | : | Frequency synchronize tracing range: ±10% |
| Harmonic Distortion (THD) | : | ≤3% (100% non-linear load) |
| BATTERY | ||
| Backup Time | : | 6 ~10 minutes |
| OUTPUT | ||
| Power Factor | : | 0.9 |
| Frequency Line Mode | : | ±1%/ ±2%/ ±4%/ ±5%/ ±10% of the rated frequency (optional) |
| Crest Factor | : | 3:1 |
| Efficiency | : | 93.5% |
| Transfer Time | : | Utility to Battery: 0ms; Utility to Bypass: 0ms |
| Overload | : | Load ≤100%: last 60min; ≤125%: last 10min; ≤150%: last 1min; ≥150% change to bypass |
| Short Circuit | : | Hold Whole System |
| ENVIRONMENTAL | ||
| Storage Temperature | : | -25 ~ 55ºC (No battery) |
| Altitude | : | <1500m, When >1500m, lower the rated power for use |
| PHYSICAL UPS Without External Battery (UPS Only) | ||
| Dimension D x W x H (mm) | : | 860 x 255 x 860 |
| Net Weight | : | 60 |
| STANDARDS | ||
| EMC | : | IEC/EN62040-2, IEC61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5, IEC61000-4-6, IEC61000-4-8 |